Investigation of seismic base isolation systems and their properties
Main Article Content
Abstract
The use of various seismic isolators instead of changing the dimensions of the structural elements is an increasingly common practice in the design of buildings against earthquakes. The differences in soil properties, inadequacy in inspections and workmanship errors negatively affect the earthquake performance of the structures. Similarly, the complexity of earthquake forces that cannot be formulated adequately makes structural engineering solutions difficult. All these factors can be counted as the reasons that make the insulators, which enable the structure to make different displacements from the ground, stand out as a solution tool. In this study, the types and properties of seismic base isolation systems were investigated.
Article Details
References
Celep, Z. (2019). Introduction to Earthquake Engineering. Istanbul: Beta Publishing and Distribution Inc.
Tolay, A. (2006). Cost Analysis of Seismic Isolation Systems. Istanbul: Yıldız Technical University, Graduate School of Science, Master's Thesis.
TBDY (2018). Turkey Building Earthquake Code. Official Newspaper.
Gösedag, P. B. (2002). Seismic Isolation in Structures. Istanbul: Yıldız Technical University, Graduate School of Sciences, Master's Thesis.
Gökhan, E. (2009). The Effects of the Use of Insulators on the Behavior of the Structural System in Reinforced Concrete Structures. Istanbul: Istanbul Technical University, Institute of Science, Master's Thesis.
Özpalalar, C. G. (2004). Seismic Isolation and Energy Absorbers In Earthquake Resistant Building Design. Istanbul: Istanbul Technical University, Institute of Science, Master's Thesis.
Erseker, B. (2017). The Effect of Earthquake Impact Angle on Maximum Insulator Displacements in Lead Core Rubber Insulators. Eskişehir: Anadolu University, Graduate School of Sciences, Master's Thesis.
https://www.emke.com.tr/sismik-izolasyon-nedir-sismik-izolator-utilimi-deprem-izolasyon/
https://insapedia.com/sismik-izolator-nedir-ne-ise-yarar-maliyeti-ve-fiyatlari/
Hoşbas, A. B. (2006). Modeling of Multi-Storey Reinforced Concrete Building with Seismic Isolators and Curtains. Istanbul Technical University, Institute of Science, Master's Thesis.
Sevim, E. (2016). The Effect of Seismic Isolators on The Dynamic Response of Buildings: Yıldız Technical University, Institute of Science, Master's Thesis.
Baştuğ, B. K. (2004). Using Seismic Isolators Against Earthquakes in Building Systems. Yıldız Technical University, Institute of Science, Master's Thesis.
Türk, H. A. (2019). The Effect of Different Seismic Isolator Systems and Floor Number to Earthquake Behavior on Multi-Storey Reinforced Concrete Structures. Konya Technical University, Institute of Science, Master's Thesis.
Yücesoy, A. (2005). Design of Eartquake Resistant Structure with Seismic Base Isolation. Mustafa Kemal University, Institute of Science, Master's Thesis.
Çamgöz, Ç. (2002). Base Isolation Systems. Istanbul Technical University, Institute of Science, Master's Thesis.
Murat, E. (2007). Seismic Isolation Application by Placing Elastomer Bearings on the Bases of Buildings. Istanbul Technical University, Institute of Science, Master's Thesis.
Toprak, T. (2012). The Effect of Using Seismic Isolation to Behavior of Structures with Torsional Irregularity under Earthquake Loads. Istanbul Technical University, Institute of Science, Master's Thesis
Karaca, E. O., Tanyıldızı, M., & Bozkurt, N. (2022). A study of seismic isolators used in buildings and their properties. Advanced Engineering Days (AED), 2, 59-61.