The function of artificial intelligence and its sub-branches in the field of health

Main Article Content

Hüseyin Fırat Kayıran


Nowadays, computers and smartphones, tablets and other electronic gadgets have become indispensable for human life. Human health is paramount. It is very important to know the use of robotic applications in the health sector and to closely follow the general developments related to this issue. The human brain is in a constant state of interaction with this technology. The specialties formed by the adaptation of nanotechnology to human health; tissue engineering is very important for people. Artificial intelligence is one of the greatest engineering works in the history of mankind and the world. Artificial Intelligence technology has become a field that humanity has often heard about with the increase of epidemic diseases. Artificial intelligence is the ability to exhibit human-like behavior. Artificial intelligence has the potential to make scientific research, an area where people focus, much more efficient and increase the speed of scientific research by a factor. In this study, the importance and usability of machine learning in human health were investigated by literature review. The results obtained from different studies are shown in the figures.

Article Details

How to Cite
Kayıran, H. F. (2022). The function of artificial intelligence and its sub-branches in the field of health. Engineering Applications, 1(2), 99–107. Retrieved from


Elmas, Ç., (2003). Fuzzy logic controllers. Seçkin Publishing House, Ankara Faculty, Water Foundation First Edition, Istanbul, 189s.

Minsky, M. (1960). Steps toward artifıcial intelligence. Lexington, Lincoln Laboratory.

Brooks, R. A., (1991). Artificial intelligence without representation. Elsevier, 139-159.

Öztemel, E. (2003). Artificial neural networks. Papatya Publishing, 44s, Istanbul.

Bayrak, E., (2022). Evaluation of the interaction of artificial intelligence and space design in today's design education. Hacettepe University Institute of Fine Arts, Master's Thesis, 142 p.

Parlu, R. A. (2021). Development of artificial intelligence index with the use of doubt in favor approach, Istanbul University Institute of Social Sciences, Master's Thesis, 302p.

Türk,, O. (2021). How to government military ai: On the global governance of artificial intelligence from an international security perspective, Graduate Education Institute, Istanbul Technical University, Master's Thesis,146s.

Chen, F., Lv, H., Pang, Z., Zhang, J., Hou, Y., Gu, Y., ... & Yang, G. (2018). WristCam: A wearable sensor for hand trajectory gesture recognition and intelligent human–robot interaction. IEEE Sensors Journal, 19(19), 8441-8451.

Avanzini, G. B., Ceriani, N. M., Zanchettin, A. M., Rocco, P., & Bascetta, L. (2014). Safety control of industrial robots based on a distributed distance sensor. IEEE Transactions on Control Systems Technology, 22(6), 2127-2140.

Kurzweil, R. (2015). Creating a mind. İstanbul Bilgi University Press, 159 pp, İstanbul.

Sandhya, N., & Dhage, R. C. K. (2016). A review on machine learning techniques. In International Journal on Recent and Innovation Trends in Computing and Communication, 4(3), 139-159.

Yıldırım, A. E., & Karcı, A. (2015). Preparation of the optimum nutrition chart for the individual using artificial atom algorithm. Mustafa Kemal University Medical Journal, 6(24), 1-11.

Çelik, Ö., Odabaş, A., Bayraktar, İ. Ş., Bilgir, E., & Akkoca, K. F. (2019). Detection of missing teeth from panoramic radiography with deep learning method: An artificial intelligence pilot study. Selcuk Dental Journal, 6 (4), 168 – 172

Geetha, V., Aprameya, K. S., & Hinduja, D. M. (2020). Dental caries diagnosis in digital radiographs using back-propagation neural network. Health Information Science and Systems, 8(1), 1-14.

Lee, J. H., Kim, D. H., Jeong, S. N., & Choi, S. H. (2018). Diagnosis and prediction of periodontally compromised teeth using a deep learning-based convolutional neural network algorithm. Journal of periodontal & implant science, 48(2), 114-23.

Amasya, H., & Yıldırım, D. (2018). Artificial intelligence applications in dentistry. Turkiye Klinikleri Journal of Dentistry Sciences, 24, 227.

Chartrand, G., Cheng, P. M., Vorontsov, E., Drozdzal, M., Turcotte, S., Pal, C. J., ... & Tang, A. (2017). Deep learning: a primer for radiologists. Radiographics, 37(7), 2113-2131.

Candan, H. (2019). Comparison of the performance of machine learning methods in the diagnosis of lung diseases with the speed of sound transmission. Ege University, Institute of Health Sciences, Department of Biostatistics and Medical Informatics, İzmir.

Endustri40, (2020). Access Address:, Access Date: 01.05.2020.a

Badillo, S., Banfai, B., Birzele, F., Davydov, I. I., Hutchinson, L., Kam‐Thong, T., ... & Zhang, J. D. (2020). An introduction to machine learning. Clinical pharmacology & therapeutics, 107(4), 871-885.

Goodfellow, I. & Bengio, Y. (2016). Courville, A. Deep Learning; M.I.T. Press: Cambridge, MA, USA.

Öztürk, T., & Katar, O. (2022). A Deep Learning Model Collaborates with an Expert Radiologist to Classify Brain Tumors from MR Images. Turkish Journal of Science and Technology, 17(2), 203-210.

Lee, J. H., Kim, D. H., Jeong, S. N., & Choi, S. H. (2018). Diagnosis and prediction of periodontally compromised teeth using a deep learning-based convolutional neural network algorithm. Journal of periodontal & implant science, 48(2), 114-123.

Lee, J. H., Kim, D. H., Jeong, S. N., & Choi, S. H. (2018). Detection and diagnosis of dental caries using a deep learning-based convolutional neural network algorithm. Journal of dentistry, 77, 106-111.

Srivastava, M. M., Kumar, P., Pradhan, L., & Varadarajan, S. (2017). Detection of tooth caries in bitewing radiographs using deep learning. arXiv preprint arXiv:1711.07312.

Nature, (2022). Access Address:, Access Date: 01.10.2022.

Chen, H., Zhang, K., Lyu, P., Li, H., Zhang, L., Wu, J., & Lee, C. H. (2019). A deep learning approach to automatic teeth detection and numbering based on object detection in dental periapical films. Scientific reports, 9(1), 1-11.

Dishekfak, (2020). Access Address:, Access Date: 01.05.2020.

Deng, L., & Yu, D. (2014). Deep learning: methods and applications. Foundations and trends® in signal processing, 7(3–4), 197-387.

Widrow, B., (1960). Adaptive Adaline neuron using chemical memistors. Number Technical Report 1553-2. Stanford Electron. Labs. Stanford, CA.

Kükner, C. U., (2020). A comparative analysis of LSTM and XG Boost methods for day ahead electricity price forecasting, Istanbul Technical University, Energy Institute, Department of Energy Science and Technology, Master's Thesis, 105 pp.

Kayıran, H. F., (2020). Use of Artificial Intelligence in Food Engineering, 4th International Mersin Symposium, Mersin.

Kayıran, H. F., & Gökalp, H. (2020). Epidemics Artificial Intelligence (Robots) and Law, 4th International Mersin Symposium, Mersin.

Techblog, (2022). Access Address:, Access Date: 07.07.2022.

Bmc, (2022). Access Address:, Access Date: 07.07.2022.

Bingöl, H., & Alataş, B., (2021). Classification of brain tumor images using deep learning methods. Turkish Journal of Science Technology, 16(1), 137-143.

Dong, H., Yang, G., Liu, F., Mo, Y., & Guo, Y. (2017). Automatic brain tumor detection and segmentation using u-net based fully convolutional networks. In annual conference on medical image understanding and analysis, Springer, 506-517.

Nvidia Developer, (2022). Access Address:, Access Date: 07.07.2022.

Koriavinash, (2022). Access Address: Access Date: 01.10.2022.

Koriavinash, (2022). Access Address: Access Date: 01.10.2022.

Ker, J., Wang, L., Rao, J., Lim, T., (2018). Deep Learning Applications in Medical Image Analysis. Special Section on Soft Computing Techniques for Image Analysis in The Medical Industry Current Trends, Challenges and Solutions. Digital Object Identifier 10.1109/Access.2017.2788044. pp: 9375-9389.

Kayıran, H. F. (2022). Investigation of stress in rotating cylinders with gray irons (Grade G4000) materials by mathematical programming. Advanced Engineering Days (AED), 4, 100-102.

Kayıran, H. F., & Şahmeran, U. (2022). Development of individualized education system with artificial intelligence fuzzy logic method. Advanced Engineering Days (AED), 4, 103-105.