Vol. 2 No. 1
Articles

Deviation Analysis of Historical Building Based on Terrestrial Laser Scanner Data and 3D Mesh Model

PDF
  • S.Armağan Güleç Korumaz,
  • Recep SAYAR
S.Armağan Güleç Korumaz
Konya Technical University, Faculty of Architecture and Design, Konya, Turkey
Recep SAYAR
MSc, Architect

Published 2022-03-30

Keywords

  • Cultural Heritage,
  • Deviation Analysis,
  • Point Cloud,
  • Terrestrial Laser Scanning

How to Cite

Güleç Korumaz, S., & SAYAR, R. (2022). Deviation Analysis of Historical Building Based on Terrestrial Laser Scanner Data and 3D Mesh Model. Advanced LiDAR, 2(1), 21–30. Retrieved from https://publish.mersin.edu.tr/index.php/lidar/article/view/327

Abstract

The use of Terrestrial Laser Scanner (TLS) technologies in cultural heritage studies has become more common day by day. In addition to documenting a historical building with high accuracy, TLS technologies can obtain detailed data about the structure being studied by analyzing point cloud. Laser scanning data is seen as a non-contact and effective analysis method in determining the formal deformations that occur due to various reasons, especially in historical buildings. With this method, it is possible to determine how much the object deviates from a reference 3D model or plane and with this analysis, deformation maps can be prepared. With the help of these maps, intervention decisions can be made. Within the scope of the article, laser scanning data of Selime Sultan Tomb located in Güzelyurt Selime Town in Türkiye, one of the important settlements of Cappadocia, were acquired. By comparing the 3D mesh model prepared with base on point data, the morphological differences and deviations of the tomb were determined and mapped.

PDF

References

  1. Ahmad Fuad, N., Yusoff, A. R., Ismail, Z. & Majid, Z. (2018). Comparing the performance of point cloud registration methods for landslide monitoring using mobile laser scanning data. Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci, 42, 11-21.
  2. Alptekin, A. & Yakar, M. (2020). Mersin Akyar Falezi’nin 3B modeli. Türkiye Lidar Dergisi, 2(1), 5-9.
  3. Alptekin, A., Çelik, M. Ö. & Yakar, M. (2019a). Anıtmezarın yersel lazer tarayıcı kullanarak 3B modellenmesi. Türkiye Lidar Dergisi, 1(1), 1-4.
  4. Alptekin, A., Fidan, Ş., Karabacak, A., Çelik, M. Ö. & Yakar, M. (2019b). Üçayak Örenyeri'nin yersel lazer tarayıcı kullanılarak modellenmesi. Türkiye Lidar Dergisi, 1(1), 16-20.
  5. Altuntas, C., Yildiz, F., Karabork, H., Yakar, M. & Karasaka, L. (2007, October). Surveying and documentation of detailed historical heritage by laser scanning. In XXI International CIPA Symposium (Vol. 1, No. 06).
  6. Anil, E. B. (2013). Deviation analysis method for the assessment of the quality of the as-is Building Information Models generated from point cloud data." Automation in construction 35, 507-516.
  7. Anonim, Aksaray Turizm Envanteri (1995). Konya, 1995, s. 17.
  8. Bakırer, Ö. (1981). Selçuklu öncesi ve Selçuklu dönemi Anadolu mimarisinde tuǧla kullanımı (Vol. 2). Orta Doğu Teknik Üniversitesi.
  9. Bertacchini, E., Boni, E., Carpa, A., Castegnetti, C. & Dubbini, M. (2010). Terrestrial Laser Scanner for Surveying and Monitoring Middle Age Towers, FIG Congress, Facing the Challenges-Building the Capacity, Sydney, Australia.
  10. Bruno, N. & Roncella, R. A. (2018). Restoration oriented HBIM system for cultural heritage documentation: the case study of Parma cathedral. In: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol. XLII-2, 171-178.
  11. Castagnetti, C., Bertacchini, E., Capra, A. & Dubbini, A. (2012). Terrestrial Laser Scanning for Preserving Cultural Heritage: Analysis of Geometric Anomalies for Ancient Structures. FIG Working Week 2012 Knowing to Manage the Territory, Protect the Environment, Evaluate the Cultural Heritage., Rome, Italy, 1-13
  12. Fregonese, F., Barbieri, G., Biolzi, L., Bocciarelli, M., Frigeri, A. & Taffurelli, A. (2013). Surveying and Monitoring for Vulnerability Assessment of an Ancient Building. Sensors, 13, 9747-9773.
  13. Holst, C., Klingbeil, L., Esser, F. & Kuhlmann, H. (2017, October). Using point cloud comparisons for revealing deformations of natural and artificial objects. In 7th International Conference on Engineering Surveying (INGEO) (pp. 18-20).
  14. Hsieh, C. T. (2012, November). An efficient development of 3D surface registration by Point Cloud Library (PCL). In 2012 International Symposium on Intelligent Signal Processing and Communications Systems (pp. 729-734). IEEE.
  15. Kaartinen, E., Dunphy, K. & Sadhu, A. (2022). LiDAR-Based Structural Health Monitoring: Applications in Civil Infrastructure Systems. Sensors, 22(12), 4610.
  16. Konyalı, İ. H. (1975). Âbideleri ve kitabeleri ile Niğde Aksaray tarihi. Fatih Yayınevi.
  17. Korumaz, M., Betti, M., Conti, A., Tucci, G., Bartoli, G., Bonora, V. & Fiorini, L. (2017). An integrated Terrestrial Laser Scanner (TLS), Deviation Analysis (DA) and Finite Element (FE) approach for health assessment of historical structures. A minaret case study. Engineering Structures, 153, 224-238.
  18. Lindenbergh, R. & Pietrzyk, P. (2015). Change detection and deformation analysis using static and mobile laser scanning. Applied Geomatics, 7(2), 65-74.
  19. Neuner, H., Holst, C. & Kuhlmann, H. (2016). Overview on current modelling strategies of point clouds for deformation analysis. Allgemeine Vermessungs-Nachrichten: AVN; Zeitschrift für alle Bereiche der Geodäsie und Geoinformation, 123(11-12), 328-339.
  20. Nguyen, C. H. P. & Choi, Y. (2018). Comparison of point cloud data and 3D CAD data for on-site dimensional inspection of industrial plant piping systems. Automation in Construction, 91, 44-52.
  21. Önkal, H. (1996). Anadolu Selçuklu Türbeleri (Vol. 91). Atatürk Kültür Merkezi.
  22. Pesci, A., Casula G. & Boschi E. (2011). Laser scanning the Garisenda and Asinelli towers in Bologna (Italy): Detailed deformation patterns of two ancient leaning buildings, Journal of Cultural Heritage 12, 117–127.
  23. Scaioni, M., Roncella, R., & Alba, M. I. (2013). Change detection and deformation analysis in point clouds. Photogrammetric Engineering & Remote Sensing, 79(5), 441-455.
  24. Schneider, D. (2006, May). Terrestrial laser scanning for area based deformation analysis of towers and water dams. In Proc. of 3rd IAG/12th FIG Symp., Baden, Austria, May, 22-24.
  25. Teza G. & Pesci A. (2013). Geometric characterization of cylinder-shaped structure from laser scanner data: development of an analysis tool and its use on a leaning bell tower. Journal of Cultural Heritage, 14, 411–423
  26. Ulvi, A. & Yakar, M. (2014). Yersel Lazer Tarama Tekniği Kullanarak Kızkalesi’nin Nokta Bulutunun Elde Edilmesi ve Lazer Tarama Noktalarının Hassasiyet Araştırması. Harita Teknolojileri Elektronik Dergisi, 6(1), 25-36.
  27. Ulvi, A., Yakar, M., Toprak, A. S., & Mutluoglu, O. (2014). Laser Scanning and Photogrammetric Evaluation of Uzuncaburç Monumental Entrance. International Journal of Applied Mathematics Electronics and Computers, 3(1), 32-36.
  28. Vanneschi, C., Eyre, M., Francioni, M. & Coggan, J. (2017, June). The use of remote sensing techniques for monitoring and characterization of slope instability. In ISRM European Rock Mechanics Symposium-EUROCK 2017. OnePetro.
  29. Wunderlich, T., Niemeier, W., Wujanz, D., Holst, C., Neitzel, F. & Kuhlmann, H. (2016). Areal deformation analysis from TLS point clouds—The challenge flächenhafte deformationsanalyse aus tls punktwolken–die herausforderung. allgemeine vermessungs-nachrichten (avn), 123(11-12), 340-351.
  30. Yakar, M., Yılmaz, H. M. & Mutluoğlu, H. M. (2009). Hacim Hesaplamalarında Laser Tarama ve Yersel Fotogrametrinin Kullanılması, TMMOB Harita ve Kadastro Mühendisleri Odası 12. Türkiye Harita Bilimsel ve Teknik Kurultayı, Ankara.
  31. Yakar, M., Yilmaz, H. M. & Mutluoglu, O. (2014). Performance of Photogrammetric and Terrestrial Laser Scanning Methods in Volume Computing of Excavtion and Filling Areas. Arabian Journal for Science and Engineering, 39(1), 387-394.
  32. Yang, H., Omidalizarandi, M., Xu, X. & Neumann, I. (2017). Terrestrial laser scanning technology for deformation monitoring and surface modeling of arch structures. Composite Structures, 169, 173-179.
  33. Yılmaz, H. M. & Yakar, M. (2006a). Lidar (Light Detection And Ranging) Tarama Sistemi. Yapı Teknolojileri Elektronik Dergisi, 2(2), 23-33.
  34. Yılmaz, H. M. & Yakar, M. (2006b). Yersel lazer tarama Teknolojisi. Yapı teknolojileri Elektronik dergisi, 2(2), 43-48.