Cultural heritage modelling using UAV photogrammetric methods: a case study of Kanlıdivane archeological site
Main Article Content
Abstract
Because of its geographical location, Turkey has hosted various civilizations. As a result, our country has a diverse cultural heritage inventory derived from the civilizations it hosts and the civilizations that it interacts. In terms of cultural heritage protection, preserving these assets and transmitting them to the future generations is critical. Ground and weather conditions, material degradation, natural disasters, fire, war, and misuse can all cause significant damage to these objects over time. It is vital to document the artifacts in such circumstances in order to conserve them and transfer them to the future generations. In order to transfer the cultural heritage to future generations, technological instruments and procedures are utilized to document existing artifacts and structures. Within the scope of this study, the UAV photogrammetry method was used to create the 3D point data and solid model of the Monumental Tomb of Aba built in the 2nd century AD, located in the Kanlıdivane region of Mersin province in Turkey. Images were taken with Parrot Anafi HDR unmanned aerial vehicle and a 3D model was produced. Detailed length, area, volume and coordinate measurements were made on the model obtained and verified with another software. Floor perimeter, floor area and volume of the monumental tomb are also presented in the results section.
Downloads
Article Details
References
Turkey Culture Portal (n.d.). Kanlidivane Ruins – Mersin. Retrieved from: https://www.kulturportali.gov.tr/turkiye/mersin/gezilecekyer/kanlidivane
Naycı, N. (2020). Architectural inventory and building condition assessment research on masonry structures of Kanlıdivane archaeological site, Mersin. Cultural Heritage and Science, 1(1), 32-38.
Mörel, A. (2019). Kümbetbeleni Komenin (Doğu Dağlık Kilikia Bölgesi) Roma Dönemi Mezarları. Colloquium Anatolicum 2019/18, 93-121.
Çelik, M. Ö., Yakar, İ., Hamal, S. N. G., Oğuz, G. M., & Kanun, E. (2020). Sfm tekniği ile oluşturulan 3B modellerin kültürel mirasın belgelenmesi çalışmalarında kullanılması: Gözne Kalesi örneği. Türkiye İnsansız Hava Araçları Dergisi, 2(1), 22-27.
Yakar, M., & Yılmaz, H. M. (2008). Kültürel miraslardan tarihi Horozluhan’in fotogrametrik rölöve çalişmasi ve 3 boyutlu modellenmesi. Selçuk Üniversitesi Mühendislik, Bilim Ve Teknoloji Dergisi, 23 (2), 25-33.
Mırdan, O. & Yakar, M. (2017). Tarihi Eserlerin İnsansız Hava Aracı İle Modellenmesinde Karşılaşılan Sorunlar . Geomatik, 2 (3), 118-125. DOI: 10.29128/geomatik.306914
Alptekin, A., & Yakar, M. (2021). 3D model of Üçayak Ruins obtained from point clouds. Mersin Photogrammetry Journal, 3(2), 37-40.
Alptekin, A., Çelik, M. Ö., Doğan, Y., & Yakar, M. (2019). Mapping of a rockfall site with an unmanned aerial vehicle. Mersin Photogrammetry Journal, 1 (1), 12-16.
Alptekin, A., & Yakar, M. (2020). Heyelan bölgesinin İHA kullanarak modellenmesi. Türkiye İnsansız Hava Araçları Dergisi, 2(1), 17-21.
Kusak, L, Unel, F. B., Alptekin, A., Celik, M. O., & Yakar, M. (2021). Apriori association rule and K-means clustering algorithms for interpretation of pre-event landslide areas and landslide inventory mapping. Open Geosciences, 13(1), 1226-1244. https://doi.org/10.1515/geo-2020-0299
Ünel, F. B., Kuşak, L., Çelik, M. Ö., Alptekin, A., & Yakar, M. (2020). Kıyı çizgisinin belirlenerek mülkiyet durumunun incelenmesi. Türkiye Arazi Yönetimi Dergisi, 2(1), 33-40.
Alptekin, A., & Yakar, M. (2020). Determination of pond volume with using an unmanned aerial vehicle. Mersin Photogrammetry Journal, 2(2), 59-63.
Karabacak, A. (2021). İnsansız hava araçları (İHA) İle enerji nakil hatlarının ölçülmesi üzerine derleme. Türkiye Fotogrametri Dergisi, 3 (1), 1-8.
Parrot (2021). Anafi white paper v1.4. Retrieved from: https://www.parrot.com/assets/s3fs-public/2021-02/anafi-product-sheet-white-paper-en.pdf
Balasubramanian, A. (2017). Digital elevation model (dem) in GIS. 10.13140/RG.2.2.23976.47369.